| Operating mode | Hold: adjustable spring force,Release: compressed air |
| Function type | Clamp with eccentric tappet |
| suitable piston rod diameter | 20 mm |
| Piston diameter | 50,63 mm |
| Compressed air connection | G 1/8 |
| Function | Clamp with eccentric tappet |
| Release pressure | 2 … 8 bar |
| Ambient temperature min./max. | -20 … 80 °C |
| Medium temperature min./max. | -20 … 80 °C |
| Medium | Compressed air |
| Max. particle size | 5 µm |
| Oil content of compressed air | 0 … 5 mg/m³ |
| Weight | See table |
| Warning:The Locking unit may not be used for the following applications:- for dynamic holding- in or as safety equipment Locking unit may only be unlocked when turned off. Note:The minimum release pressure is >= the working pressure of the cylinder!The holding force is dependent on the set spring force |
| Material |
|---|
| Housing | Aluminum, anodized |
| Cap | Die-cast aluminum |
