| Piston rod modification | Optionally through |
| Functional principle | double-acting |
| Cushioning | elastic |
| Magnetic piston | with magnetic piston |
| Piston diameter | 25 mm |
| Piston rod thread | M6 |
| Standardization | NFE 49004 |
| Stroke | 5 mm |
| Sealing material | Nitrile butadiene rubber |
| Scraper | Polyurethane |
| ATEX optional | |
| Compressed air connection | M5 |
| Compressed air connection type | Internal thread |
| Temperature resistance | Optionally heat-resistant |
| Standards | NFE 49004 |
| Certificates | ATEX optional |
| Compressed air connection | Internal thread |
| Ambient temperature min./max. | -20 … 80 °C |
| Medium temperature min./max. | -20 … 80 °C |
| Medium | Compressed air |
| Max. particle size | 50 µm |
| Oil content of compressed air | 0 … 5 mg/m³ |
| Pressure for determining piston forces | 6.3 bar |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C … 50 °C. The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C … 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
| Material |
|---|
| Cylinder tube | Aluminum, anodized |
| Piston rod | Stainless steel |
| Front cover | Aluminum |
| End cover | Aluminum |
| Seal | Nitrile butadiene rubber Polyurethane |
| Scraper | Polyurethane |
