| Actuating control | double solenoid |
| Switching principle | 5/2 |
| Version | Spool valve, positive overlapping |
| Housing | Polyamide fiber-glass reinforced |
| Sealing material | Hydrogenated acrylonitrile butadiene rubber |
| UR (Underwriters Laboratories) | |
| Protection class | IP65,IP67,IP69K |
| Nominal flow Qn | 700 l/min |
| Compressed air connection input | G 1/8 |
| Compressed air connection output | G 1/8 |
| DC operating voltage | 24 V |
| Activation | Electrically |
| Version | Spool valve, positive overlapping |
| Activation | Electrically |
| Pilot | External |
| Sealing principle | Soft sealing |
| Blocking principle | Single base plate principle |
| Certificates | UR (Underwriters Laboratories) |
| Working pressure min./max. | -0,9 … 10 bar |
| Control pressure min./max. | 3 … 10 bar |
| Ambient temperature min./max. | 0 … 50 °C |
| Medium temperature min./max. | 0 … 50 °C |
| Medium | Compressed air |
| Max. particle size | 5 µm |
| Oil content of compressed air | 0 … 5 mg/m³ |
| Nominal flow Qn | 700 l/min |
| Pilot control exhaust | With collective pilot air exhaust |
| Protection class with connection | IP65 IP67 IP69K |
| Protective circuit | Z-diode |
| Reverse polarity protection | Protected against polarity reversal |
| LED status display | Yellow |
| Duty cycle | 100 % |
| Typ. switch-on time | 13 ms |
| Typ. switch-off time | 15 ms |
| mounting screws | M5 |
| Mounting screw tightening torque | 2 Nm |
| Tightening torque tolerance | ±0,2 mT |
| Weight | 0,165 kg |
| The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| For series QR2 fittings, see “Pneumatic connection technologies”. The inner valve can be replaced by all series CL03 valves described under “Valve systems”. The pilot valve is UL (Underwriters Laboratories) certified. |
| Material |
|---|
| Housing | Polyamide fiber-glass reinforced |
| Seals | Hydrogenated acrylonitrile butadiene rubber |
| Threaded bushing | Brass, nickel-plated Stainless steel |
