| Functional principle | double-acting |
| Cushioning | pneumatically |
| adjustable | |
| Magnetic piston | with magnetic piston |
| Piston diameter | 100 mm |
| Piston rod thread | M20x1,5 |
| Standardization | ISO 15552 |
| Stroke | 500 mm |
| Sealing material | Polyurethane |
| Scraper | Polyurethane |
| Compressed air connection | G 1/2 |
| Compressed air connection type | Internal thread |
| Standards | ISO 15552 |
| Compressed air connection | Internal thread |
| Working pressure min./max. | 1,5 … 10 bar |
| Ambient temperature min./max. | -20 … 80 °C |
| Medium temperature min./max. | -20 … 80 °C |
| Medium | Compressed air |
| Max. particle size | 50 µm |
| Oil content of compressed air | 0 … 5 mg/m³ |
| Pressure for determining piston forces | 6.3 bar |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| NOTE:The orientation and position of the trunnion mounting in the center of the cylinder may not be changed! |
| Material |
|---|
| Cylinder tube | Aluminum, anodized |
| Piston rod | Stainless steel |
| Front cover | Die-cast aluminum |
| End cover | Die-cast aluminum |
| Seal | Polyurethane |
| Nut for piston rod | Steel, galvanized |
| Scraper | Polyurethane |
| Trunnion mounting | Nodular graphite iron, galvanized |
| Tie-rods | Stainless steel Steel, galvanized |
| See table for additional data on materials. |
