| Functional principle | double-acting |
| Cushioning | elastic |
| Piston diameter | 100 mm |
| Piston rod thread | M20 |
| Standardization | ISO 15524 |
| Stroke | 100 mm |
| Sealing material | Nitrile butadiene rubber |
| Scraper | Polyurethane |
| Compressed air connection | G 3/8 |
| Compressed air connection type | Internal thread |
| Standards | ISO 15524 |
| Compressed air connection | Internal thread |
| Ambient temperature min./max. | -20 … 80 °C |
| Medium temperature min./max. | -20 … 80 °C |
| Medium | Compressed air |
| Max. particle size | 50 µm |
| Oil content of compressed air | 0 … 5 mg/m³ |
| Pressure for determining piston forces | 6.3 bar |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| Note the selection of fittings for strokes < 10 mm . |
| Material |
|---|
| Cylinder tube | Aluminum, anodized |
| Piston rod | Stainless steel |
| Front cover | Brass Aluminum |
| End cover | Aluminum |
| Seal | Nitrile butadiene rubber |
| Scraper | Nitrile butadiene rubber Polyurethane |
| See table for additional data on materials. |
