| Sealing material | Hydrogenated acrylonitrile butadiene rubber |
| Subbase | Polyamide fiber-glass reinforced |
| Compressed air connection input | G 1/2 |
| Type | metric |
| Medium | Compressed air |
| Weight | See table |
| The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| End plate kit: external pilot |
| Material |
|---|
| Base plate | Polyamide fiber-glass reinforced |
| Seal | Hydrogenated acrylonitrile butadiene rubber |
| Screws | Stainless steel |
