| Type of contact | Reed |
| Cable length | 3 m |
| Housing | epoxy resin |
| Cable | with cable |
| Protection class | IP67,IP65 |
| Number of wires | 2-pin |
| Type | without wire end ferrule, tin-plated |
| Slot width | 9 mm groove |
| For series | KHZ |
| Ambient temperature min./max. | See table |
| Protection class | IP67 IP65 |
| Switching point precision | ±0,1 mT |
| Nominal current, actuated state | < 7 mA |
| Quiescent current (without load) | < 3 mA |
| Min./max. DC operating voltage | See table |
| Min./max. AC operating voltage | See table |
| LED status display | See table |
| Vibration resistance | 60 g (50 … 2000 Hz) |
| Shock resistance | 100 g / 11 ms |
| Cable length L | 3 5 m |
| If reed sensors are used, we recommend using a short-circuit protective device (SCPD). |
| Material |
|---|
| Housing | epoxy resin |
| Cable sheath | Polyvinyl chloride Polyurethane |
