| Activation | Mechanical |
| Parts | Pressure regulator |
| Relieving exhaust | with relieving air exhaust |
| Housing | Die cast zinc |
| Sealing material | Chloroprene rubber |
| Nominal flow Qn | 2000 l/min |
| Compressed air connection | G 1/4 |
| Temperature resistance | -30 °C cold-resistant |
| Parts | Pressure regulator |
| Mounting orientation | Any |
| Working pressure min./max. | 0,5 … 16 bar |
| Ambient temperature min./max. | -30 … 60 °C |
| Medium temperature min./max. | -30 … 60 °C |
| Medium | Compressed air Neutral gases |
| Regulator type | Diaphragm-type pressure regulator Can be assembled into blocks |
| Regulator function | with relieving air exhaust |
| Adjustment range min./max. | See table |
| Pressure supply | single |
| Activation | Mechanical |
| Weight | 0,325 kg |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Suitable for use in Ex zones 1, 2, 21, 22. The rear pressure gauge connection on the pressure regulator is closed with a blanking plug, the front connection is open. Depending on the customer application, a second blanking plug may be necessary. Please order separately (see accessories). Relieving exhaust (? 0.3 bar over set pressure). With rear exhaust (> 3 bar ). |
|
| Recommended pre-filtering | 5 µm |
| Material |
|---|
| Housing | Die cast zinc |
| Front plate | Acrylonitrile butadiene styrene |
| Seals | Chloroprene rubber |
