Activation | Mechanical |
Parts | Pressure regulator |
Relieving exhaust | with relieving air exhaust |
lockable | lockable |
Housing | Polyamide |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 14500 l/min |
Compressed air connection | G 1 |
Parts | Pressure regulator |
Mounting orientation | Any |
Certificates | suitable for ATEX |
Working pressure min./max. | See table |
Ambient temperature min./max. | -10 … 50 °C |
Medium temperature min./max. | -10 … 50 °C |
Medium | Compressed air Neutral gases |
Regulator type | Diaphragm-type pressure regulator Can be assembled into blocks |
Regulator function | with relieving air exhaust |
Adjustment range min./max. | See table |
Lock type | for padlocks |
Pressure supply | single |
Activation | Mechanical |
Internal air consumption qv max. | 1,5 l/min |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The rear pressure gauge connection on the pressure regulator is closed with a blanking plug, the front connection is open. Depending on the customer application, a second blanking plug may be necessary. Please order separately (see accessories). A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Relieving exhaust (? 0.3 bar over set pressure). With rear exhaust (> 3 bar ). Suitable for use in Ex zones 1, 2, 21, 22. |
Material |
---|
Housing | Polyamide |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |