Activation | Mechanical |
Parts | Pressure regulator |
Relieving exhaust | with relieving air exhaust |
Pressure gauge | with pressure gauge |
lockable | lockable |
Housing | Polyamide |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 1600 l/min |
Compressed air connection | G 3/8 |
Parts | Pressure regulator |
Mounting orientation | Any |
Certificates | suitable for ATEX |
Working pressure min./max. | See table |
Ambient temperature min./max. | -10 … 50 °C |
Medium temperature min./max. | -10 … 50 °C |
Medium | Compressed air Neutral gases |
Regulator type | Diaphragm-type pressure regulator Can be assembled into blocks |
Regulator function | with relieving air exhaust |
Adjustment range min./max. | See table |
Lock type | for padlocks |
Pressure supply | single |
Activation | Mechanical |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The rear pressure gauge connection on the pressure regulator is closed with a blanking plug, the front connection is open. Depending on the customer application, a second blanking plug may be necessary. Please order separately (see accessories). A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Suitable for use in Ex zones 1, 2, 21, 22. Relieving exhaust (? 0.3 bar over set pressure). With rear exhaust (> 3 bar ). |
Material |
---|
Housing | Polyamide |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |