| Functional principle | double-acting |
| Cushioning | elastic |
| Piston diameter | 10 mm |
| Piston rod thread | M4 |
| Standardization | ISO 6432 |
| Stroke | 50 mm |
| Sealing material | Acrylonitrile butadiene rubber |
| Scraper | Polyurethane |
| Corrosion resistance | corrosion-resistant |
| Compressed air connection | M5 |
| Compressed air connection type | Internal thread |
| Compressed air connection | Internal thread |
| Ambient temperature min./max. | -20 … 70 °C |
| Medium temperature min./max. | -20 … 70 °C |
| Medium | Compressed air |
| Max. particle size | 50 µm |
| Oil content of compressed air | 0 mg/m³ |
| Pressure for determining piston forces | 6.3 bar |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| Nut MR3 included in supply |
| Material |
|---|
| Cylinder tube | Stainless steel |
| Piston rod | Stainless steel |
| Front cover | Polyoxymethylene |
| End cover | Polyoxymethylene |
| Connection thread | Stainless steel |
| Seal | Acrylonitrile butadiene rubber |
| Nut for cylinder mounting | Polyamide |
| Nut for piston rod | Stainless steel |
| Scraper | Polyurethane |
