| Air supply | left |
| Version | Poppet valve |
| Housing | Polyamide |
| Sealing material | Acrylonitrile butadiene rubber |
| Protection class | IP65 |
| Port size | ISO 15217, form C |
| Type | Plug |
| Qn 1?2 | 1300 l/min |
| Qn 2?3 | 380 l/min |
| Nominal flow Qn | 1300 l/min |
| Compressed air connection input | G 1/4 |
| Compressed air connection output | G 1/4 |
| DC operating voltage | 24 V |
| Version | Poppet valve, Can be assembled into blocks |
| Parts | Filling valve, 3/2-directional valve, electrically operated |
| Nominal flow | 1300 l/min |
| Nominal flow 1 ? 2 | 1300 l/min |
| Nominal flow 2 ? 3 | 380 l/min |
| Working pressure min./max. | 2,5 … 10 bar |
| Medium | Compressed air Neutral gases |
| Medium temperature min./max. | -10 … 50 °C |
| Ambient temperature min./max. | -10 … 50 °C |
| Pilot | Internal |
| Sealing principle | Soft sealing |
| Max. particle size | 25 µm |
| Protection class acc. to DIN EN 61140 with plug | IP65 |
| Duty cycle | 100 % |
| Weight | See table |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The filling valve builds up pressure slowly in the pneumatic systems, i.e. prevents a sudden pressure build-up during a recommissioning after a mains pressure failure or avoids emergency OFF switching. This allows dangerous abrupt cylinder motions to be avoided. Do not position filling valves or filling units upstream of open consumers, such as nozzles, air barriers, air curtains, since these may prevent through connection of components. |
| Material |
|---|
| Housing | Polyamide |
| Front plate | Acrylonitrile butadiene styrene |
| Seals | Acrylonitrile butadiene rubber |
| Threaded bushing | Die cast zinc |
