| Housing | Polyamide |
| Sealing material | Nitrile butadiene rubber |
| Subbase | Aluminum |
| Protection class | IP65 |
| Coding | A-coded |
| Number of wires | 5-pin |
| Port size | M12 |
| Nominal flow Qn | 550 l/min |
| Hysteresis | < 0.2 bar |
| Compressed air connection input | G 1/4 |
| Compressed air connection output | G 1/4 |
| DC operating voltage | 24 V |
| Version | Poppet valve |
| Working pressure max | 11 bar |
| Ambient temperature min./max. | -10 … 60 °C |
| Medium temperature min./max. | -10 … 60 °C |
| Compressed air connection input | G 1/4 |
| Compressed air connection output | G 1/4 |
| Compressed air connection, exhaust | G 1/8 |
| Medium | Compressed air |
| Max. particle size | 40 µm |
| Oil content of compressed air | 0 … 5 mg/m³ |
| Nominal flow Qn | 550 l/min |
| Control | Analog |
| DC operating voltage | 24 V |
| Voltage tolerance DC | -20% / +30% |
| Permissible ripple | 5% |
| Protection class | IP65 |
| Weight | 0,26 kg |
| The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| Material |
|---|
| Housing | Polyamide |
| Base plate | Aluminum |
| Seals | Nitrile butadiene rubber |
