Standardization | ISO 5599-2 |
Frame size | ISO 1 |
Actuating control | single solenoid |
Return type | With spring return |
Switching principle | 5/2 |
Version | Spool valve |
Housing | Polyamide fiber-glass reinforced |
Sealing material | Acrylonitrile butadiene rubber |
Connector standard | ISO 5599-2 |
Protection class | IP65 |
Port size | ISO 5599-2 |
Type | Plug |
Qn 1?2 | 1400 l/min |
Nominal flow Qn | 1400 l/min |
Compressed air connection input | Base plate DIN ISO 5599 size 1 |
Compressed air connection output | Base plate DIN ISO 5599 size 1 |
DC operating voltage | 24 V |
Version | Spool valve |
Sealing principle | Soft sealing |
Blocking principle | Single base plate principle |
Connection type | Plate connection |
Standards | ISO 5599-2, ISO 1 |
Connector standard | ISO 5599-2 |
Working pressure min./max. | 0 … 10 bar |
Control pressure min./max. | 2,7 … 10 bar |
Ambient temperature min./max. | -20 … 50 °C |
Medium temperature min./max. | 0 … 50 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 … 5 mg/m³ |
Nominal flow Qn | 1400 l/min |
Compressed air connection | according to ISO 5599 |
Protection class with connection | IP65 |
Protection class according to NEMA | NEMA 4 |
Protective circuit | Z-diode |
Reverse polarity protection | Protected against polarity reversal |
LED status display | Green |
Nominal resistance | 288 ? |
Duty cycle | 100 % |
Typ. switch-on time | 17 ms |
Typ. switch-off time | 28 ms |
Mounting screw | with hexagon socket |
Mounting screw tightening torque | 3 Nm |
Weight | 0,35 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Housing | Polyamide fiber-glass reinforced |
Seals | Acrylonitrile butadiene rubber |