| Actuating control | Single air pilot |
| Version | Poppet valve |
| Housing | Polyoxymethylene |
| Sealing material | Acrylonitrile butadiene rubber |
| Nominal flow Qn | 200 l/min |
| Compressed air connection input | Ø 6×1 |
| Compressed air connection output | Ø 6×1 |
| Activation | pneumatically |
| Version | Poppet valve |
| Activation | pneumatically |
| Sealing principle | Soft sealing |
| Flow rate value | 200 l/min |
| Working pressure min./max. | 2 … 10 bar |
| Control pressure min./max. | 2 … 10 bar |
| Ambient temperature min./max. | -15 … 60 °C |
| Medium temperature min./max. | -15 … 60 °C |
| Medium | Compressed air |
| Max. particle size | 50 µm |
| Oil content of compressed air | 0 … 1 mg/m³ |
| Mounting on manifold strip | PRS strip |
| Weight | 0,048 kg |
| The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| The maximum operating pressure depends on the ambient temperature. The following values are applicable:-15 °C … 60°C: Operating pressure 1.5 bar … 8 bar possible.-15 °C … 40 °C: Operating pressure 1.5 bar … 10 bar possible. |
| Material |
|---|
| Housing | Polyoxymethylene |
| Seals | Acrylonitrile butadiene rubber |
| Threaded bushing | Polyoxymethylene |
