| Standardization | ISO 8573-1: class 6 |
| Switching principle | 3/2 |
| Version | Poppet valve |
| Protection class | IP00 |
| Number of wires | 2-pin |
| Qn 1?2 | 11 l/min |
| Qn 2?3 | 14 l/min |
| DC operating voltage | 24 V |
| Activation | Electrically |
| Version | Poppet valve |
| Activation | Electrically |
| Sealing principle | Soft sealing |
| Standards | ISO 8573-1: class 6 |
| Working pressure min./max. | 3 … 8 bar |
| Ambient temperature min./max. | -10 … 60 °C |
| Medium temperature min./max. | -10 … 60 °C |
| Medium | Neutral gases Compressed air |
| Max. particle size | 5 µm |
| Oil content of compressed air | 0 … 5 mg/m³ |
| Nominal flow 1 ? 2 | 11 l/min |
| Nominal flow 2 ? 3 | 14 l/min |
| Protection class with connection | IP00 |
| Duty cycle | 100 % |
| Typ. switch-on time | 12 ms |
| Weight | 0,005 kg |
| Comment | Orifice size 1->2 Ø 0.5 mm ,Orifice size 2->3 Ø 0.7 mm |
| The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| Voltage can be reduced from 24 VDC to 22 VDC for long duty cycle and will reduce power consumption from 1.2 W to 1 W. Minimum current for keeping permanent switched on position: 15 mA. Nominal flow Qn at 6 bar input pressure and atmospheric output pressure Contact your nearest AVENTICS sales office for installation dimensions. Please contact your nearest AVENTICS sales office for current availability. |
