| Switching principle | 3/2 |
| Version | Poppet valve |
| Housing | Aluminum |
| Sealing material | Acrylonitrile butadiene rubber |
| Protection class | IP65 |
| Port size | EN 175301-803, form A |
| Type | Plug |
| Nominal flow Qn | 13620 l/min |
| Compressed air connection input | G 1 |
| DC operating voltage | 24 V |
| Activation | Electrically |
| Version | Poppet valve |
| Activation | Electrically |
| Working pressure min./max. | 3,5 … 10 bar |
| Control pressure min./max. | 3,5 … 10 bar |
| Ambient temperature min./max. | -20 … 50 °C |
| Medium temperature min./max. | -20 … 50 °C |
| Medium | Compressed air |
| Max. particle size | 5 µm |
| Oil content of compressed air | 0 … 5 mg/m³ |
| Nominal flow Qn | 13620 l/min |
| Duty cycle | 100 % |
| Weight | See table |
| The min. control pressure must be adhered to and should be equal or higher than the working pressure. Otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| Min./max. operating pressure for external pilot: – 1 bar / 10 bar The valves can be energized via the port closed with a plug on the front side of the cover. The size of the compressed air connection output for series 563, 565, 567 can vary due to optional use of the base plate. The base plate can be found under “Mechanical accessories”. |
| Material |
|---|
| Housing | Aluminum |
| Seals | Acrylonitrile butadiene rubber |
