| Version | Poppet valve |
| Housing | Die-cast aluminum |
| Sealing material | Acrylonitrile butadiene styrene |
| Protection class | IP65 |
| Qn 1?2 | 12500 l/min |
| Qn 2?3 | 3900 l/min |
| Compressed air connection input | G 1 |
| Compressed air connection output | G 1 |
| Version | Poppet valve, Can be assembled into blocks |
| Parts | 3/2-directional valve, electrically operated |
| Nominal flow 1 ? 2 | 12500 l/min |
| Nominal flow 2 ? 3 | 3900 l/min |
| Working pressure min./max. | 2,5 … 10 bar |
| Medium | Compressed air Neutral gases |
| Medium temperature min./max. | -10 … 60 °C |
| Ambient temperature min./max. | -10 … 60 °C |
| Pilot | Internal |
| Sealing principle | Soft sealing |
| Protection class acc. to DIN EN 61140 with plug | IP65 |
| Duty cycle | 100 % |
| Weight | See table |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. ATEX optional: The ATEX ID depends on the selected pilot valve. The connections on the front and back are not connected to the main air flow. No pressure gauge may be connected here. |
|
| Recommended pre-filtering | 8 µm |
| Material |
|---|
| Housing | Die-cast aluminum |
| Front plate | Acrylonitrile butadiene styrene |
| Seals | Acrylonitrile butadiene styrene |
