| Standardization | ISO 5599-1 |
| Cable length | 0.5 m |
| Frame size | ISO 1 |
| Switching principle | 2×3/2 |
| Version | Spool valve |
| Housing | Polyamide fiber-glass reinforced |
| Sealing material | Acrylonitrile butadiene rubber |
| Protection class | IP67 |
| Number of wires | 3-pin |
| Type | Plug |
| Nominal flow Qn | 950 l/min |
| Compressed air connection input | Base plate ISO 5599-1 |
| Compressed air connection output | Base plate ISO 5599-1 |
| DC operating voltage | 24 V |
| Version | Spool valve |
| Pilot | External |
| Sealing principle | Soft sealing |
| Blocking principle | Single base plate principle |
| Connection type | Plate connection |
| Standards | ISO 5599-1, ISO 1 |
| Working pressure min./max. | 0 … 8 bar |
| Control pressure min./max. | 3,5 … 8 bar |
| Ambient temperature min./max. | -10 … 50 °C |
| Medium temperature min./max. | -10 … 50 °C |
| Medium | Compressed air |
| Max. particle size | 50 µm |
| Oil content of compressed air | 0 … 5 mg/m³ |
| Nominal flow Qn | 950 l/min |
| Flow conductance C | 3,2 l/(s*bar) |
| Protection class with connection | IP67 |
| Protective circuit | Z-diode |
| Reverse polarity protection | Protected against polarity reversal |
| LED status display | Green |
| Duty cycle | 100 % |
| Typ. switch-on time | 15 ms |
| Typ. switch-off time | 22 ms |
| Mounting screw | with hexagon socket |
| Mounting screw tightening torque | 2 Nm |
| Weight | 0,22 kg |
| The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| Housing | Polyamide fiber-glass reinforced |
| Seals | Acrylonitrile butadiene rubber |
